Polk Audio PAD5000.5 900w RMS 5-Channel Marine Amplifier Boat Amp PA D5000.5

Polk Audio PAD5000.5 900w RMS 5-Channel Marine Amplifier Boat Amp PA D5000.5

$74.24
Skip to product information
Polk Audio PAD5000.5 900w RMS 5-Channel Marine Amplifier Boat Amp PA D5000.5

Polk Audio PAD5000.5 900w RMS 5-Channel Marine Amplifier Boat Amp PA D5000.5

$74.24

Features:
Polk Audio PAD5000.5 5-Channel 900w RMS 2-Ohm Car Audio Amplifier Amp PA D5000.5
Super-Efficient Class D Design¡ªRuns much cooler than conventional amps.
High-Speed MOSFET Switching¡ªPower supply with outputs stable into 2 Ohm loads for full range channel speakers and 1 Ohm loads for subwoofer channel.
Protection¡ªThermal, DC offset, reverse DC voltage and short circuit protection.
Sub 1/Sub 2 Inputs¡ªLine level inputs for subwoofer signal from head unit
SUB/INT Source Switch¡ªIn the INT position, the amplifier will filter the bass frequencies from the full range signal and send them to the subwoofer amplifier channel.
SUB Sonic Filter¡ªAttenuates the frequencies below the settings on the control.
Remote Bass Level Control¡ªSet gain to match output from head unit.
Rear Full, HPF Switch¡ªSelects between no filtering or a high pass filter to dial in your speakers' blending.
Channel Mode Switch (4CH/ST)¡ªIn the ST position, the amplifier sends the same signal to the front and rear channels.
Nickel-Plated Wire Terminals & RCA connectors¡ª Ensure maximum signal transfer.
Stainless Steel Hardware¡ªUsed throughout won't corrode in humid environments.
Specifications:
Type: Bridgeable Class D MOSFET
Channels: 5 channel
RMS Continuous Power @ 4 Ohms: 70 W x 4; 200 W x 1
RMS Continuous Power @ 2 Ohms: 100 W x 4; 400 W x 1
RMS Continuous Power Bridged @ 4 Ohms: 200 W x 2
RMS Continuous Power 1 Ohm (Sub): 500 W x 1
Distortion at Rated Power: <0.1%
Remote Gain Control Included (sub only)
Minimum Impedance Bridged: 4 Ohms
Minimum Impedance Not Bridged: 2 Ohms
Minimum Impedance Subwoofer Channel: 1 Ohm
Signal-to-noise Ratio: 105 dB
Frequency Response: 20 Hz-20 kHz
Crossover Filter Slope: 12 dB/octave
Front Gain Control: 200 mV - 6 V
Filter Switch (Front): 3-position (BPF, Full, HPF)
High Pass Filter Frequency Range (Front): 40 Hz - 400 Hz
Low Pass Filter Frequency Range (Front): 80 Hz - 4 kHz
Filter Switch (Rear): 2-position (Full, HPF)
High Pass Filter Frequency Range (Rear): 40 Hz - 4000 Hz
Rear Gain Control: 200 mV - 6 V
Line Level Inputs
LED Power Indicator
LED Protection Indicator
Supply Voltage: 10 V - 16 V
Fusing & Power/Type: (2) 40 Amp ATC
Power Connections: 4 AWG
Ground Connections: 4 AWG
Speaker Connections: 12 AWG
Height: 1 13/16 (46 mm)
Depth: 6 3/4 (171.5 mm)
Width: 13 5/16 (338.1 mm)
Width w/ Terminal Adaptor: 14 1/16 (357.9 mm)
Weight: 6 3/4 lbs (3.06 kg)

You may also like