MTX 7515-44 15750 Watt RMS Competition Subwoofer + Vented Sub Box Enclosure
$139.58
Skip to product information
Rockville RSV15 Single 152.6 cu. ft. 3/4MDF Vented Subwoofer Enclosure Box
Machine precision cut mounting holes
?¡± USA Heavy Duty MDF Construction
Top of the line Glue for extra durable adhesion
High quality GOLD spring loaded terminals
Designed, tested, and engineered to work perfectly with high powered subs
Designed to give the best sound quality
Tuning frequency: 32Hz
Enclosure Measurements:
Type of Enclosure: Ported/Vented
Enclosure Sub Size: Single 15
Dimensions in Inches: 21x 18x 16.25
Top and Bottom Depth: 16.25
Mounting Depth: up to 15(enough depth for any shallow sub on the market)
Gross Volume Per Sub (Measurement for the outer dimensions of the box): 3.5 Cubic Feet
Net Volume Per Sub (Measurement for the outer dimensions of the box less the thickness of the wood): 2.6 Cubic Feet
Includes:
10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
12 Feet of 14 AWG Blue Speaker Wire
2 Spade Terminals
This accessory package includes everything you need to install one subwoofer into an enclosure, and wire to connect the enclosure to your amplifier. This package is a top of the line accessory package which we put together and tested.
The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure. The speaker wire is 14 gauge. This is way better than using 16 gauge. You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire. These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secure, and to run the audio signal cleanly.
MTX 7515-44 15750 Watt RMS Competition Subwoofer + Vented Sub Box Enclosure
$139.58
Package Includes:
(1) MTX 7515-44 151500w Peak/750w RMS Competition Subwoofer DVC 4ohm Car Audio Sub
(1) Rockville RSV15 15Vented Car Audio Subwoofer Box 2.6 Cubic Ft. Sub Enclosure
10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
12 Feet of 14 AWG Blue Speaker Wire
2 Spade Terminals
Features:
MTX 7515-44 151500 Watt Peak/750 Watt RMS 4-Ohm Car Subwoofer
RMS Power Handling: 750 Watts
Peak Power Handling: 1500 Watts
Recommended Amp Power: 375-750 Watts RMS
Impedance: Dual 4 Ohms
Frequency Response: 20Hz - 130Hz
Sensitivity: 87.85 dB
Voice Coil: 2.5inches (Dual)
Magnet Weight: 119 oz.
Mounting Depth: 8.375inches
Cut Out Diameter: 13.875
Volume Displacement: 91.66 cu in
Sealed Enclosure Net Volume: 1.5 cu ft.
Vented Enclosure Net Volume: 2.48 cu ft.
Inverted Apex Surround: Increases Surface Area Resulting in Increased Volume Displacement and SPL
Spider Plateau Venting: Targets Cool Air at Voice Coil for Improved Thermal Performance
Progressive Suspension: Controls Excursion at High Power Reducing Distortion Resulting in Better Sound Quality
Radial Ribbed T-Yoke: Helps Dissipates Heat and Decreases Distortion Improving Sound Quality
Cast Aluminum Basket: Reduces Resonance for Improved Sound Quality
Click here for the Installation Sheet
Rockville RSV15 Single 152.6 cu. ft. 3/4MDF Vented Subwoofer Enclosure Box
Machine precision cut mounting holes
?¡± USA Heavy Duty MDF Construction
Top of the line Glue for extra durable adhesion
High quality GOLD spring loaded terminals
Designed, tested, and engineered to work perfectly with high powered subs
Designed to give the best sound quality
Tuning frequency: 32Hz
Enclosure Measurements:
Type of Enclosure: Ported/Vented
Enclosure Sub Size: Single 15
Dimensions in Inches: 21x 18x 16.25
Top and Bottom Depth: 16.25
Mounting Depth: up to 15(enough depth for any shallow sub on the market)
Gross Volume Per Sub (Measurement for the outer dimensions of the box): 3.5 Cubic Feet
Net Volume Per Sub (Measurement for the outer dimensions of the box less the thickness of the wood): 2.6 Cubic Feet
Includes:
10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
12 Feet of 14 AWG Blue Speaker Wire
2 Spade Terminals
This accessory package includes everything you need to install one subwoofer into an enclosure, and wire to connect the enclosure to your amplifier. This package is a top of the line accessory package which we put together and tested.
The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure. The speaker wire is 14 gauge. This is way better than using 16 gauge. You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire. These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secure, and to run the audio signal cleanly.